(mm)(50max)33100°(28)100°30Waterproof Connector(100max)90°90°(53)(100max)1690°50°(55)(100max)1690°50°(55)505050When tilting an extrusion within the minimum installation dimension, offset the center axis of the fixture installation by about 4mm.4mm50Luminous Material50507514mm5070When tilting an extrusion within the minimum installation dimension, offset the center axis of the fixture installation by about 14mm.7550Luminous Material75(89)Φ20(300)50(39)L300=298 / L600=598 / L900=898(89)42(300)50(40)3267(38)69(42)69Ceiling and floor slits.This effectively reduces glare from side-viewing angles when it is installed in slit areas. Architectural exteriors, rooftop construction, walls and signboards.This linear glare guard is highly effective in reducing glare on exterior applications where the fixture is viewed directly and not concealed.StandardWith L-GuardThe Slit-Guard and L-Guard are used in conjunction with each other to eliminate glare from front and side-viewing perspectives.StandardWith Partition-GuardPRODUCT GUIDE5PRODUCT GUIDEGRADIENT OUTDOOR StandardGRADIENT OUTDOOR with Slit-GuardGRADIENT OUTDOOR with L-GuardGRADIENT OUTDOOR with Partition-GuardStandard ExtrusionSlit-Guard L-GuardWith GuardPartition-GuardArchitectural exteriors and areas needing additional protection against glare.6Glare cut angle: 42̊StandardWith Slit-GuardSpecial features for our Louver lineupsSpecificationsMinimum Space Requirements
元のページ ../index.html#4