OLS_ProductGuide_2025
5/5

NLLNN/ADALI +DALI − LDCC-15W-700DALI(mm)LDCC-50W-700DALI/1ch(mm)3231.57740.52332ch is not used188※ The indicated angle above is for our standard extrusion. Refer to the dimensioned drawings on pages 5 and 6 for the range adjustment of various louvers.to the system for plug-and-go simplicity.Each run of OLS requires this feed connector with a 2m lead.The End Connector insulates a female connector at the end of a run and completes the circuit.Extension cables extend the distance between fix-tures and may be added to OLS-CON connector to reach remote LED driver locations.O'Links 78Securely mount fixtures using screws on all four mounting holes.Each fixture is fitted with adjustable brackets on the ends.This aluminum stake will be fastened on OLS adjust-able brackets at the factory.DALI ControllerPower SupplyLDCC-50W-700DALI/1chOLS Stake for 1-LED typeOLS Stake for 3-LED typeOLS-1-SPI-OPOLS-3-SPI-OP90°90°OLS-CON-2m/ECOLS Lead Cable 2m & End ConnectorOLS-EXT-1mOLS Extension Cable 1mOLS-EXT-5mOLS Extension Cable 5mOLS-EXT-10mOLS Extension Cable 10mSpecificationsInput Range : 100~240VACFrequency Range : 50/60 HzOutput : 2.5-15VDCCurrent : 700mAMax. Output Power : 15W(MAX)Protection : Overload, Overcurrent, Short CircuitOperating Temperature : 0°C to +40°CMechanical SpecificationsDimensions : W 32 x L 233 x H 31.5 mmWeight : 220gLED Capacity1-4 OLS (2.1 Watt) LEDsSpecificationsInput Range : 100~240VACFrequency Range : 50/60 HzOutput : 8-55VDCCurrent : 700mAMax. Output Power : 50W(MAX)Protection : Overload, Overcurrent, Short CircuitOperating Temperature : 0°C to +40°CMechanical SpecificationsDimensions : W 77 x L 188 x H 40.5 mmWeight : 460gLED Capacity3-17 OLS (2.1 Watt) LEDsEnd ConnectorOLS-CON-2m/ECOLS-CON-2m/EC (2m length)OLS-EXT-1m (1m length)OLS-EXT-5m (5m length)OLS-EXT-10m (10m length)REQUIREDMountingAdjustable bracketsMounting StakeOLS ConnectorsOLS ConnectorsWater proof connectors link fixtures and bring 700mA Power SupplyWiring DiagramInstructionDA+DA−OutputRed : LED+Black : LED−The total wiring length must not exceed 40 meters when using this power supply.This total length refers to the distance from the output (secondary side) of the power supply to the last fixture, and includes both the dedicated OLS lead wire and any on-site extension cables (AWG 16 x 2C).OutputRed : LED+Black : LED−

元のページ  ../index.html#5

このブックを見る