(mm)(55max)90°90°(28)(100max)3290°90°(54)(100max)1690°50°(55)(100max)1690°50°(54)20(mm)557514mm557070When tilting an extrusion within the minimum installation dimension, offset the center axis of the fixture installation by about 14mm.75555555When tilting an extrusion within the minimum installation dimension, offset the center axis of the fixture installation by about 4mm.4mm55Luminous Material5055Luminous Material3-LED typeThis effectively reduces glare from side-viewing angles when it is installed in slit areas.Glare cut angle : 42̊This linear glare guard is highly effective in reducing glare on exterior applications where the fixture is viewed directly and not concealed.The Slit-Guard and L-Guard are used in conjunction with each other to eliminate glare from front and side-viewing perspectives.※ For proper air flow, the dimensions indicated are required to prevent heat build up.(33)(45)4350200(40)67(40)69(42)691000, 5000 or 100004645OLS Extension Cable 1mOLS Extension Cable 5mOLS Extension Cable 10m12810835(120)20020OLS-EXT-1mOLS-EXT-5mOLS-EXT-10mΦ2060(46)(72)200(72)(39)(72)(72)200020 2045OLS-CON-2m/ECOLS Lead Cable 2m & End Connector1-LED type80Φ20(46)(45)20046End ConnectorWith L-GuardWith Guard56With Partition-GuardArchitectural exteriors and areas needing additional point lighting.StandardCeiling and floor slits.StandardWith Slit-Guard Architectural exteriors, rooftop construction, walls and signboards.StandardOLS Extension CableStandard ExtrusionO'LINKS StandardO'LINKS with Slit-GuardO'LINKS with L-GuardO'LINKS with Partition-GuardOLS Lead Cable & End Connector Partition-GuardSlit-Guard L-GuardMinimum Space RequirementsSpecificationsSpecial features for our Louver lineups
元のページ ../index.html#4