※ For proper air flow, the dimensions indicated are 1-LED type3-LED type(mm)(55max)90°90°(28)(100max)(54)90°90°(100max)1650°90°(55)(100max)1690°50°(54)20555555When tilting an extrusion within the minimum installation dimension, offset the center axis of the fixture installation by about 4mm.4mm55Luminous Material50557514mm557070When tilting an extrusion within the minimum installation dimension, offset the center axis of the fixture installation by about 14mm.7555Luminous MaterialOLS-CON-2m/ECOLS Lead Cable 2m & End Connector80Φ2060(46)(72)200(72)(39)(72)(72)2000202045Φ20(46)(45)2004612810835(120)20020OLS-EXT-1mOLS-EXT-5mOLS-EXT-10mOLS Extension Cable 1mOLS Extension Cable 5mOLS Extension Cable 10m(33)(45)4350200(40)3267(40)69(42)691000, 5000 or 100004645required to prevent heat build up.Ceiling and floor slits.This effectively reduces glare from side-viewing angles when it is installed in slit areas. Architectural exteriors, rooftop construction, walls and signboards.This linear glare guard is highly effective in reducing glare on exterior applications where the fixture is viewed directly and not concealed.StandardWith L-GuardThe Slit-Guard and L-Guard are used in conjunction with each other to eliminate glare from front and side-viewing perspectives.StandardWith Partition-GuardPRODUCT GUIDE5PRODUCT GUIDEO'LINKS StandardO'LINKS with Slit-GuardO'LINKS with L-GuardO'LINKS with Partition-GuardOLS Lead Cable & End Connector End ConnectorOLS Extension CableStandard ExtrusionSlit-Guard L-GuardWith GuardPartition-GuardArchitectural exteriors and areas needing additional point lighting.6Glare cut angle : 42̊StandardWith Slit-GuardSpecial features for our Louver lineupsSpecificationsMinimum Space Requirements
元のページ ../index.html#4