（17）［mm］［lx］＋＋Manual ModeYou may select aIn this case, no e0/1-10 VDC InDMX InThe mount base can be fixed from the front side or from the back side.Fix the power stand in any position using the included hex wrench.Mount base, cover Top cap are included in Stand lead processing.87 lm(78 lm)86 lm(78 lm)56184(27326)14046(6832)6243(3036)3512(1708)2247(1093)72 lm(58 lm)29172(13379)18676(8354)7293(3345)4669(2089)3241(1487)2075(928)1823(836)1167(522)1167(535)747(334)24VDC(+), Black /White-lineLength of the power stand can be adjusted on site.Φ6.5PanelΦ724VDC(-), BlackHex wrench32Rotating angle360°Φ16Φ15Length of the power standMax. length of the power stand100 to 1200Cover102000When fixing the mount base from the back side, please specify the length of the power stand considering the panel thickness and mount base height 10mm.Φ3422Φ7mm cutoutMount baseΦ3mm flat head screwsRequired spacePlease have enough space for installation with the hex wrench and for adjusting the length of the power stand.(mm)53（21）14Rotating angle 360°339LWH※Length of the power standMax. length of the power standPanel thicknessMount base 10mm100 to 1200Mount baseInstalled image9846143All values shown are for 3000K modules*The values in parentheses are CRI95, 3000K modules100200300400500Φ30Φ50Φ60Φ100Φ90Φ150Φ120Φ200Φ250Φ140Φ60Φ110Φ170Φ230Φ280Technical Specifications Voltage : 24VDCMax. Load : DC24V 5AWeight : 350gLDR24-16SpecificationsMax. Output Current : 0.67AMax. Output Power : 16WProtection: Overload, Over Voltage,Short Circuit, Over TemperatureWorking Temperature : -30°C~+50°CMechanical SpecificationsDimensions : W40 x L150 x H33mmWeight : 210gEnclosure Rating : Suitable for use in Dryand Damp Locations/IP30 RatedMounting : Flange MountLED Module CapacityOBS LED module : 6 eachLC-OB-DIMLDR24-25SpecificationsMax. Output Current : 1.05AMax. Output Power : 25WProtection : Overload, Over Voltage,Short Circuit, Over TemperatureWorking Temperature : -30°C~+50°CMechanical SpecificationsDimensions : W40 x L150 x H33mmWeight : 360gEnclosure Rating: Suitable for use in Dry,Damp and Wet Locations/IP67 RatedMounting : Flange MountLED Module CapacityOBS LED module : 9 each(mm)LDR24-40SpecificationsMax. Output Current : 1.67AMax. Output Power : 40WProtection : Overload, Over Voltage,Short Circuit, Over TemperatureWorking Temperature : -30°C~+50°CMechanical SpecificationsDimensions : W43 x L163 x H33mmWeight : 440gEnclosure Rating : Suitable for use in Dry,Damp and Wet Locations/IP67 RatedMounting : Flange MountLED Module CapacityOBS LED module : 15 eachPart #: LC-1CH-MULTITechnical Specifications Max. Load : 96W @ 24VDCTechnical Specifications:Environmental Rating : Dry Location/IP20Max. Load: 96 watts @ 24 VDCDimensions : W40 x L90 x H20mmEnvironmental Rating: Dry Location/IP20Weight : 50gDimensions: 3/4" x 1-3/4" x 3-1/2"Listing : ETL Listed/CE CertifiedOperating Temperature : 0~+50°CWeight: 50g / 0.11 lbsListing: ETL Listed/CE CertifiedOperating Temperature: 0~+50ºCDMX ModeIn this mode, dimmer packs are addressable and may be used with any DMX Modecontroller working on DMX protocol. In this mode, dimmer packs are addressable and may be used with any controller working on DMX protocol. Up to 36 Up to 36 dimmer packs may be connected in series. dimmer packs may be connected in series. For applications For applications exceeding 36 dimmer packs, a splitter is required. Consult exceeding 36 dimmer packs, a splitter is required. Consult factory on details of DMX Splitters.factory on details of DMX Splitters.Analog Mode 0-10/1-10VDCFor operation from devices using 0-10/1-10VDC protocol, up to 10 dimmer Analog Mode 0/1-10 VDCpacks may be connected in series. For operation from devices using 0/1-10 VDC protocol, For applications exceeding 10 dimmer packs, an additional feed from the up to 10 dimmer packs may be connected in series. For analog dimming device is required.applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required. Manual ModeYou may select a light intensity at which the fixtures operate. In this case, no external dimming device is required.Common SpecificationsInput Range : 100~240VACFrequency Range : 50/60 HzOutput : 24VDC (+/- 4%)LDR24-16 Safety StandardsUL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384, J61347-1, J61347-2-13 approved,Design refer to UL60950-1, TUV EN60950-1LDR24-25 Safety StandardsUL8750, CSA C22.2 No. 250.0-08, EN61347-1,EN61347-2-13 independent, EN62384, J61347-1,J61347-2-13 approved, IP67 approved; Design refer to UL60950-1, TUV EN60950-1LDR24-40 Safety StandardsUL8750, CSA C22.2 No. 250.0-08, ENECEN61347-1, EN61347-2-13 independent,EN62384, IP67,J61347-1, J61347-2-13 approved;Design refer to UL60950-1, TUV EN60950-116D24DFixed from the front sideTop capORBIT SPOTUp to 8 modules may be attachedPower standLength should be specified.Manufacturing range : 01.m to 1.2mCoverMount baseStand lead processingΦ3mm flat head screwsMount baseΦ7mm cutoutHex wrenchCoverRequired spacePlease have enough space for installation and for adjusting the length of the power stand.30DInstalled imageFixed from the front sideFix the power stand in any position using the included hex wrench.15Fixed from the back sideFixed from the back side16LC-1CH-MULTI Dimming System/24LC-1CH-MULTITokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard Tokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standarddimmers working on DMX or 0-10V/1-10V protocol. In the manual mode, a 0/1-10 VDC protocol. In the manual mode, a preset light level can be set withpreset light level can be set without the use of an external dimmer.24VDC DriversDimmer Packs Product ComponentsLight DistributionInstructionsSpecificationsPower Supplies & Dimmer Packs
元のページ ../index.html#9