CRI8527K : 2700K30K : 3000K35K : 3500K40K : 4000K50K : 5000KCRI95HC27KHC30KHC35KHC40KHC50KBeam Angle16D : 16°24D : 24°30D : 30°Module ColorB : BlackS : SilverLED modules may be positioned at any location on the stand, even when the light is on, it can be adjusted.Additionally, the pan and tilt directions can each be rotated 360°, allowing for free illuminating. The stand length can be specified between 0.1m and 1.2m.13Power standOB-STD24V-※(※Color : B, S)Manufacturing range : 0.1m to 1.2mIn increments : 0.1m (10cm)* If the stand length exceeds 0.6m, the fixture may sway due to vibrations from the motor or air conditioning. Please contact us for details.Stand lead processingOB-SLC-※(※Color of Cover and Top Cap : B, S)* 2m lead wire, Mount base, Cover and Top cap are included.Voltage = 24VDCWattage = 1.7W/LEDMain Materials = Aluminum, PC & PMMAWeight = 16g/LEDGlare-cut Angle = 30°REQUIRED* Please be sure to specify the length of the power stand when ordering.Depending on the installation method, the embedded length must be considered. Please check the dimensional drawing.You can easily dim each module independently (stepless dimming) by just pushing the fixture towards the power stand.It is also possible to dim all the lights at once by using a dedicated dimmer unit. Since control is based on individually set dimming values, the overall brightness can be changed while maintaining the brightness ratio of each spotlight.Just push the fixture towards the power stand to dim it.1 to 8 LED modules may be attached to a single power stand.It is possible to illuminate multiple exhibits at the same time, or to illuminate an exhibit that tends to cast shadows from both the top and bottom.Even if the exhibition layout changes, LED modules can easily be replaced with different LED colors or beam angles, reduced or added, ensuring that the exhibits always receive the optimal light.14The LED module can be attached/detached by hand from the top of the power stand.* If the stand length exceeds 0.6m, the fixture may sway due to vibrations from the motor or air conditioning. Please contact us for details.PointCRI85CRI95Install at any location24VDC0-10V/1-10VINDOOR24VDCDMXPointPointLED ColorFreely adjustable heights and directionsPan direction360°Tilt direction360°CG imageEasy dimming with our PTD (Press-to-Dim) FeatureEasy to replace or add LED modulesSystem FeaturesSystem FeaturesOBS02- K- D-01ORBIT STAND0203
元のページ ../index.html#8