1324When installing the power supply outdoorsWhen installing the power supply indoorsNOTEAssigning Addresses- The maximum cable length from the DMX controller to the end Data Converter is 200 meters.- Use one power supply per data converter.- Control devices such as controllers and Data Converters are not waterproof and should be installed indoors.Each LED module contains Red, Green, Blue, and White LED dies. These are given unique DMX addresses at the factory and cannot be changed on site. Unless otherwise specified, we will assign the first module next to the lead wire to DMX addresses 1-4. Each succeeding module will be assigned the next 4 addresses as shown in the example the right with 6 modules.End ConnectorEnd ConnectorThe wiring diagram is provided as a reference example only. Wiring may vary depending on electrical specifications, lighting effects, and site conditions.To the next Data ConverterTo the next Data ConverterOutdoorIndoor9-1213-1617-2021-241-45-81310mOutdoorIndoorDMX ControllerIndoorDMX Controller30mOutdoor10m5m5m5mMax. extension: 20 m5m14Max. length: 2.4m1mMax. extension: 60 mMax. length: 1.8 mLED Driver LDR24-96WData Converter LC-KS-DC2LED Driver LDR24-96WData Converter LC-KS-DC2Wiring DiagramKS Data Converter Y-Connector （KSDC-YCON）Lead Cable for KS Data Converter Y-Connector （ KSDC-YCON-LC-10m ）KS Data Converter Cable 10m （KSDC-CON-10m/EC）KS Data Converter Cable 10m （KSDC-CON-10m/EC, KSDC-CON-30m/EC）KS Data Converter Extension Cable (6P), 1m / 5m （KSDC-EXT6P-1m, KSDC-EXT6P-5m）KS Data Converter Extension Cable (6P), 1m （KSDC-EXT6P-1m）Fixture side: Up to 1m x 2pcsKS Data Converter Extension Cable (6P), 1m / 5m （KSDC-EXT6P-1m, KSDC-EXT6P-5m）
元のページ ../index.html#8