Part #: LC-1CH-MULTILC-1CH-MULTIMax. Load: 96W @ 24VDCTechnical Specifications:Environmental Rating : Dry Location/IP20Max. Load: 96 watts @ 24 VDCDimensions : W40 x L90 x H20mmEnvironmental Rating: Dry Location/IP20Weight : 50gDimensions: 3/4" x 1-3/4" x 3-1/2"Listing : ETL Listed/CE CertifiedOperating Temperature: 0~+50°CWeight: 50g / 0.11 lbsListing: ETL Listed/CE CertifiedOperating Temperature: 0~+50ºCDMX ModeIn this mode, dimmer packs are addressable and may be DMX Modeused with any controller working on DMX protocol. In this mode, dimmer packs are addressable and may be used Up to 36 dimmer packs may be connected in series. with any controller working on DMX protocol. Up to 36 For applications exceeding 36 dimmer packs, a splitter is dimmer packs may be connected in series. For applications required. Consult factory on details of DMX Splitters.exceeding 36 dimmer packs, a splitter is required. Consult factory on details of DMX Splitters.Analog Mode 0-10/1-10VDCFor operation from devices using 0-10/1-10VDC protocol, Analog Mode 0/1-10 VDCup to 10 dimmer packs may be connected in series. For operation from devices using 0/1-10 VDC protocol, For applications exceeding 10 dimmer packs, an addi-up to 10 dimmer packs may be connected in series. For tional feed from the analog dimming device is required.applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required. Part #: LC-DMR The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED Driver powering the first dimmer pack. The unit installs in a single-gang box.Part #: LC-1CH-DP Each dimmer pack receives a 24 VDC input from an LED Driver and sends a PWM output to the fixture. Logic input and output is communicated through CAT5 cable. Max. Load: 96 watts @ 24 VDCDimensions: 1-1/2" x 3-1/2" x 4-1/16"0/1-10 VDC InDMX InDimmer PackLC-DMRFixtureLED DriverFixtureLED DriverPRODUCT GUIDEDimmer PackDimmer Pack22268LED driver (non-dimming)LED driver + LC-1CH-MULTI or LC dimmingAWG14 55mDMX ConsoleDimmer Pack24VDCDMX InAnalog Dimmer0-10/1-10VDC0-10/1-10VDC24VDCFixtureDimmer PackLED driverDMX OutPWM SignalDMX OutFixture0-10/1-10VDC24 VDCDimmer Pack24VDCLED driver24 VDCFixtureLED driver(mm)39LDR24-96Tokistar's LDR24-96 has a single 96 watt output.LDR24-96 SpecificationsInput Range : 100~277VACFrequency Range : 50/60HzOutput: 24VDC (+/- 3%)Max. Output Current : 4.0AMax. Output Power : 96WProtection : Overload, Over voltage,Short Circuit, Over TemperatureWorking Temperature: -30°C~+50°CMechanical SpecificationsDimensions : 68 x 222 x 39mmWeight : 998gEnclosure Rating : Suitable for use in Dry,Damp and Wet Locations/IP67 RatedMounting : Flange MountSafety StandardsUL 879, UL 8750, UL 1310 Class 2, TUVEN60950-1, EN61347-1, EN61347-2-3 ind.CAN/CSA C22.2, No. 223-M91, CE, IP67 RatedLED Module CapacityTokiLux EVO units (1.5 watt) : 64 eachAdvantage XF LEDs (0.72 watt) : 133 eachLight Veil units (4.0 watt): 24 eachThe distance from the power supply to the fixture, and the load of the fixture, will determine the proper size of secondary wire. Fixtures require an individual lead. If additional wire needs to be attached, refer to the recommendation in this chart.Manual ModeManual ModeYou may select a light intensity at which the fixtures operate. You may select a light intensity at which the fixtures operate. In this case, no external dimming device is required.In this case, no external dimming device is required.19PRODUCT GUIDEDMX Wiring Diagram0/1-10 VDC to next Dimmer Pack24VDCLED driver0-10/1-10VDC Wiring DiagramFixtureDMX to next Dimmer PackSignal to next Dimmer PackPWM SignalLC Dimming System/24 VDCThis proprietary dimming system provides full-range dimming of LEDs from our LED Drivers. The system components connect with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units.24VDC LED DriverTokiLux EVO, TokiLux EVOWG, Advantage XF and Light Veil series operate from our 24VDC LED driver. This Class 2 power supply has a single output limited to 96 watts/4 amps.LC-1CH-MULTI Dimming System/24VDCLC-1CH-MULTI Dimming System/24 VDCTokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or Tokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or0/1-10VDC protocol. In the manual mode, a preset light 0/1-10 VDC protocol. In the manual mode, a preset light level can be set without the use of an external dimmer.level can be set without the use of an external dimmer.Recommended Lead Wire Size and Length Limitation TOKISTAR LIGHTING | 1120Power SupplyDimming
元のページ ../index.html#11