※Without any bracketDifferent louvers cannot be used together. Select the one most appropriate for the application.ILS-FIXB1GRHB-HLVRFixed BracketGRHB-PLVRParallel LouverHoneycomb LouverILS-ADJB1ILS-GLVRAdjustable BracketGlare Guard LouverILS-CON-0.2m/ECILS Lead Cable 0.2m & End ConnectorILS-EXT-0.5mILS-EXT-1mILS-EXT-3mILS Extension Cable 0.5mILS Extension Cable 1mILS Extension Cable 3m37.5263842Parallel LouverParallel louvers block light from front and side viewing angles. Honeycomb LouverThis louver adds very little to the fixture's overall profile and eliminates glare from many angles.Fixed Bracket One bracket is required per module.Fixed Bracket Adjustable Bracket(mm)(mm)GRHB-PLVR4242(mm)(mm)GRHB-HLVR698642324248(mm)(mm)Adjustable Bracket One bracket is required per module.Glare Guard LouverGlare Guards slide and lock onto the fixture, preventing glare from many angles. ILS-GLVR42364253(mm)(mm)10200ILS Lead Cable 0.2m199050End Connector251109.3When I'Links are connected, the LED spacing is 200mm.500, 1000 or 30006037.522(mm)(mm)11PRODUCT GUIDEParallel LouverFixed Bracket+Parallel LouverAdjustable Bracket+Parallel LouverHoneycomb LouverFixed Bracket+Honeycomb LouverAdjustable Bracket+Honeycomb LouverGlare Guard LouverFixed Bracket+Glare Guard LouverAdjustable Bracket+Glare Guard LouverILS-CON-0.2m/ECAfter screwing brackets into the mounting position, insert the fixture into the bracket.Slide Glare Guards into the groove on the side and screw in place. Attach Glare Guards before installing the fixture. REQUIREDILS-EXT-0.5m ILS-EXT-1m ILS-EXT-3mSlide the bracket to one of the specified positions of the lighting fixture and screw it on. After attaching the bracket, fix it by screwing it to the con-struction surface. Adjustable range is ±55°.Parallel ・ Honeycomb Louver MountingBe sure to attach optional louvers directly over the center of the LED lens. These items can be attached after the fixture has been installed.PRODUCT GUIDE12Fixed Bracket MountingGlare Guard Louver MountingAdjustable Bracket MountingMounting BracketsOptional Louvers ILS ConnectorsSpecificationsInstructions
元のページ ../index.html#7