(mm)9PRODUCT GUIDE66126116107LDRCC-40-NS-DLDRCC-40-NS-DDimming 0-10VDC Source2625No longer than AWG18 x 2C 50mNo longer than AWG18 x 2C 50m1. Read all instructions completely before beginning installation.2. Turn off electricity before beginning installation.3. All wiring is to be performed by a qualified electrician.LED DriverLED Driver4. Installation must comply with the National Electrical Code, or all applicable codes.5. Turn main supply to LED Driver on only after all connections have been made and tested. 6. Use only LED Drivers provided by Tokistar with the system.LDRCC-40 SpecificationsInput Range : 100~277VACFrequency Range : 50/60 HzOutput : 3-57VDCCurrent : 700mAMax. Output Power : 40WProtection : Overload, Overcurrent, Short CircuitOver Temperature : Mis-Wiring protection (auto shutdown)Operating Temperature : -40°C to +50°CMechanical SpecificationsDimensions : 126 x 66 x 25mmWeight : 170gEnclosure Rating : IP21Mounting : Flange MountInput/Output Connectors : Wago 253/AWG16-20Safety StandardsListed to UL8750, UL Class 2, Class PEMI Compliance : FCC 47CFR Part 15 Class BLED Capacity1 FSM01 or FS01 (2.1 Watt) lighting fixturePRECAUTIONSPRODUCT GUIDE10FixtureFixtureLDRCC-40-NS-DOur constant current LED Driver accepts input from 0-10VDC dimming controls. The driver has full range dim-to-off capability.The input is universal ranging from 100 to 277VAC 50/60 Hz. Non-dimming ControlDimming ControlPower SupplyWiring Diagram
元のページ ../index.html#6